FDT Axial (B)

FDT AXIAL PULL TYPE – FDT Axial (B)

FDT-SX0 (B) has an expanding stroke of 10mm in axial direction. By constantly pressuring the cutting edge it can deburr profiles with variable height or intersecting holes.

Adjust the height of the Z axis by applying pressure of 1-2mm from the point closest to the spindle (with Z value higher) and the FDT will automatically compensate for changes in axial direction.

• With 3 types of springs almost all material types can be deburred.
• With ER-11 collet milling inserts, ranging from φ0.5mm to φ7mm, can be used.
• 10mm Axial deflection-pulling behind surface expanding.
• Compensation capacity: max stroke 10mm in expanding.
• Direction of milling: concordant
• Clockwise rotation: 6-8000 r / min
• Feed Rate: F1500-3000 mm/min