FDT PNEUMATIC X36

Robotic Deburring Tool – FDT Pneumatic X36 For robot deburring systems.

FDT is an air driven flexible tool that follows the undefined edges on the workpiece.

Please contact us for suitable spindle models.

The lateral pressure against the workpiece edge can be adjusted with a built-in mechanism. This allows adjustment of the chamfer width.

FDT Pneumatic is not affected by air pressure deviations, since its lateral flexion force is created with springs. With this feature you can achive uniform and even deburring results with air pressure deviations.

FDT Pneumatic has a robust design.  You can mount different types of spindles up to 36mm diameter.

With 20mm Veldon shank you can mount FDT Pneumatic to a Robot or bench.

Standart industrial carbide burs and profiles can be used for deburring needs.

12mm maximum deflection.

Specifications:

• Spindle Speed: 35000rpm
• Power: 300W
• Rotation: clockwise
• With ER-11 collet burrs, ranging from φ0.5mm to φ7mm can be used.
• Air consumption: 8.3 l / sec
• Air Supply: hode inside diameter 6mm
• Noise level: 78dB
• Use with lubricated air.
• Air Connectio 1/8″ Gas – from rear
• Some of the spindles can be supplied alternatively :
  45,000 rev / min 230W lubricated air
  45,000 rev / min 160W turbine dry
  55,000 or 80,000 rev / min 100W lubricated air
  65,000 or 100,000 rev / min 100W turbine